Oscyloskop samplingowy PicoScope 9311-15

Dostępność: brak towaru
Cena brutto: 79 191,77 zł 79191.77
Cena netto: 64 383,55 zł
ilość szt.
dodaj do przechowalni

Informacje o produkcie

Specyfikacja techniczna

Oscilloscope – vertical (analog) 9300-15 models 9300-20 models 9300-25 models
Number of channels PicoScope 9341: 4
All other models: 2
Acquisition timing Selectable simultaneous or alternate acquisition
Bandwidth, Full 15 GHz 20 GHz 25 GHz
Bandwidth, Narrow 8 GHz 10 GHz 12 GHz
Pulse response rise time, full bandwidth 23.4 ps (10% to 90%, calculated) 17.5 ps (10% to 90%, calculated) 14.0 ps (10% to 90%, calculated)
Pulse response rise time, narrow bandwidth 43.8 ps (10% to 90%, calculated) 35.0 ps (10% to 90%, calculated) 29.2 ps (10% to 90%, calculated)
Noise, full bandwidth < 1.2 mV RMS typical, < 1.6 mV RMS maximum < 1.5 mV RMS typical, < 2.0 mV RMS maximum < 1.9 mV RMS typical, < 2.5 mV RMS maximum
Noise, narrow bandwidth < 0.7 mV RMS typical, < 0.9 mV RMS maximum < 0.8 mV RMS typical, < 1.1 mV RMS maximum < 1.0 mV RMS typical, < 1.3 mV RMS maximum
Noise with averaging 100 μV RMS system limit, typical
Operating input voltage with digital feedback 1 V p-p with ±1 V range (single-valued)
Operating input voltage without digital feedback ±400 mV relative to channel offset (multi-valued)
Sensitivity 1 mV/div to 500 mV/div in 1-2-5 sequence with 0.5% fine increments
Resolution 16 bits, 40 μV/LSB
Accuracy ±2% of full scale ±2 mV over nominal temperature range (assuming temperature-related calibrations are performed)
Nominal input impedance (50 ±1) Ω
Input connectors 2.92 mm (K) female, compatible with SMA and PC3.5
Timebase (Sequential time sampling mode)
Ranges 5 ps/div to 3.2 ms/div (main, intensified, delayed, or dual delayed)
Delta time interval accuracy For > 200 ps/div: ±0.2% of delta time interval ± 12 ps
For < 200 ps/div: ±5% of delta time interval ± 5 ps
Time interval resolution 64 fs
Channel deskew 1 ps resolution, 100 ns max.
Triggers
Trigger sources All models: external direct, external prescaled, internal direct and internal clock triggers.
PicoScope 9302 and 9321 only: external clock recovery trigger
External direct trigger bandwidth and sensitivity DC to 100 MHz : 100 mV p-p; to 2.5 GHz: 200 mV p-p
External direct trigger jitter 1.8 ps RMS (typ.) or 2.0 ps RMS (max.) + 20 ppm of delay setting
Internal direct trigger bandwidth and sensitivity DC to 10 MHz: 100 mV p-p; to 100 MHz: 400 mV p-p (channels 1 and 2 only)
Internal direct trigger jitter 25 ps RMS (typ.) or 30 ps RMS (max.) + 20 ppm of delay setting (channels 1 and 2 only)
External prescaled trigger bandwidth and sensitivity 1 to 14 GHz, 200 mV p-p to 2 V p-p 1 to 14 GHz, 200 mV p-p to 2 V p-p
14 to 15 GHz, 500 mV p-p to 2 V p-p
External prescaled trigger jitter 1.8 ps RMS (typ.) or 2.0 ps RMS (max.) + 20 ppm of delay setting
Pattern sync trigger clock frequency 10 MHz to 14 GHz 10 MHz to 14 GHz 10 MHz to 15 GHz
Pattern sync trigger pattern length 7 to 8 388 607 (223− 1)
Clock recovery (PicoScope 9302 and 9321)
Clock recovery trigger data rate and sensitivity 6.5 Mb/s to 100 Mb/s: 100 mV p-p
>100 Mb/s to 11.3 Gb/s: 20 mV p-p
Recovered clock trigger jitter 1 ps (typ.) or 1.5 ps (max.) + 1.0% of unit interval
Maximum safe trigger input voltage ±2 V (DC + peak AC)
Input characteristics 50 Ω, AC coupled
Input connector SMA (F)
Acquisition
ADC resolution 16 bits
Digitizing rate with digital feedback (single-valued) DC to 1 MHz
Digitizing rate without digital feedback (multi-valued) DC to 40 kHz
Acquisition modes Sample (normal), average, envelope
Data record length 32 to 32 768 points (single channel) in x2 sequence
Display
Styles Dots, vectors, persistence, gray-scaling, color-grading
Persistence time Variable or infinite
Screen formats Auto, single YT, dual YT, quad YT, XY, XY + YT, XY + 2 YT
Measurement and analysis
Markers Vertical bars, horizontal bars (measure volts) or waveform markers
Automatic measurements Up to 10 at once
Measurements, X parameters Period, frequency, pos/neg width, rise/fall time, pos/neg duty cycle, pos/neg crossing, burst width, cycles, time at max/min, pos/neg jitter ppm/RMS
Measurements, Y parameters Max, min, top, base, peak-peak, amplitude, middle, mean, cycle mean, AC/DC RMS, cycle AC/DC RMS, pos/neg overshoot, area, cycle area
Measurements, trace-to-trace Delay 1R-1R, delay 1F-1R, delay 1R-nR, delay 1F-nR, delay 1R-1F, delay 1F-1F, delay 1R-nF, delay 1F-nF, phase deg/rad/%, gain, gain dB
Eye measurements, X NRZ Area, bit rate, bit time, crossing time, cycle area, duty cycle distortion abs/%, eye width abs/%, rise/fall time, frequency, period, jitter p-p/RMS
Eye measurements, Y NRZ AC RMS, average power lin/dB, crossing %/level, extinction ratio dB/%/lin, eye amplitude, eye height lin/dB, max/min, mean, middle, pos/neg overshoot, noise p-p/RMS one/zero level, p-p, RMS, S/N ratio lin/dB
Eye measurements, X RZ Area, bit rate/time, cycle area, eye width abs/%, rise/fall time, jitter p-p/RMS fall/rise, neg/pos crossing, pos duty cycle, pulse symmetry, pulse width
Eye measurements, Y RZ AC RMS, average power lin/dB, contrast ratio lin/dB/%, extinction ratio lin/dB/%, eye amplitude, eye high lin/dB, eye opening, max, min, mean, middle, noise p-p/RMS one/zero, one/zero level, peak-peak, RMS, S/N
Histogram Vertical or horizontal
Math functions
Mathematics Up to four math waveforms can be defined and displayed
Math functions, arithmetic +, −, ×, ÷, ceiling, floor, fix, round, absolute, invert, (x+y)/2, ax+b
Math functions, algebraic ex, ln, 10x, log10, ax, loga, d/dx, integrate, x2, sqrt, x3, xa, x−1, sqrt(x2 +y2)
Math functions, trigonometric sin, sin−1, cos, cos−1, tan, tan−1, cot, cot−1, sinh, cosh, tanh, coth
Math functions, FFT Complex FFT, complex inverse FFT, magnitude, phase, real, imaginary
Math functions, combinatorial logic AND, NAND, OR, NOR, XOR, XNOR, NOT
Math functions, interpolation Linear, sin(x)/x, trend, smoothing
Math functions, other Custom formula
FFT Up to two FFTs simultaneously
FFT window functions Rectangular, Hamming, Hann, flat-top, Blackman–Harris, Kaiser–Bessel
Eye diagram Automatically characterizes NRZ and RZ eye patterns based on statistical analysis of waveform
Mask tests
Mask geometry Acquired signals are tested for fit outside areas defined by up to eight polygons. Standard or user-defined masks can be selected.
Built-in masks, SONET/SDH OC1/STMO (51.84 Mb/s) to FEC 1071 (10.709 Gb/s)
Built-in masks, Ethernet 1.25 Gb/s 1000Base-CX Absolute TP2 to 10xGB Ethernet (12.5 Gb/s)
Built-in masks, Fibre Channel FC133 (132.8 Mb/s) to 10x Fibre Channel (10.5188 Gb/s)
Built-in masks, PCI Express R1.0a 2.5G (2.5 Gb/s) to R2.1 5.0G (5 Gb/s)
Built-in masks, InfiniBand 2.5G (2.5 Gb/s) to 5.0G (5 Gb/s)
Built-in masks, XAUI 3.125 Gb/s
Built-in masks, RapidIO Level 1, 1.25 Gb/s to 3.125 Gb/s
Built-in masks, SATA 1.5G (1.5 Gb/s) to 3.0G (3 Gb/s)
Built-in masks, ITU G.703 DS1 (1.544 Mb/s) to 155 Mb (155.520 Mb/s)
Built-in masks, ANSI T1.102 DS1 (1.544 Mb/s) to STS3 (155.520 Mb/s)
Built-in masks, G.984.2 XAUI-E Far (3.125 Gb/s)
Built-in masks, USB USB 3.0 (5 Gb/s), USB 3.1 (10 Gb/s)
Signal generator output
Modes Pulse, PRBS NRZ/RZ, 500 MHz clock, trigger out
Period range, pulse mode 8 ns to 524 μs
Bit time range, NRZ/RZ mode 4 ns to 260 μs
NRZ/RZ pattern length 27−1 to 215−1
TDR pulse outputs PicoScope 9311-15 PicoScope 9311-20
Number of output channels 1 2 (1 differential pair)
Output enable Yes Independent or locked control for each source
Pulse polarity Positive-going from zero volts Channel 1: positive-going from zero volts
Channel 2: negative-going from zero volts
Rise time (20% to 80%) 60 ps guaranteed
Amplitude 2.5 V to 7 V into 50 Ω
Amplitude adjustment 5 mV increments
Amplitude accuracy ±10%
Offset  

Dane techniczne

Liczba kanałów 2
Pasmo 15 GHz
Clock recovery (11.3 Gb/s) Nie
Optical input (9.5 GHz) Nie
Wbudowa TDR/TDT Tak

Opinie o produkcie (0)

Sklep jest w trybie podglądu
Pokaż pełną wersję strony